PS. Pic is not mine... Something I googled from the internet.
Hi everyone, i have a 2008 CBR150. where is a good place to send my bike for overhaul, and how much does it cost?
Thank you. Hope this thread is still active for older cbrs!
Kaki bukit. Cost i think 300-400 bucks.. Not so sure.. Better go there and check with them..
Sent from my S6 using Tapatalk
Bros here, i have one issue,
Last night, when i enter the season carpark, the ERP Carpark at HDB, it doesn't allow me to enter. It says "IU cannot detected, please insert cash card". I inserted cash card n entered the carpark
The shocking part is earlier i enter and exit other carpark without any hassle. But the moment, I stop at my season parking Barrier, the IU machine totally blackout, n there is not response when i insert or pull the cash card inside IU.
This morning i couldn't exit carpark because it says "no entry record", until i had to intercom and they open gantry.
Same problem arise tonight, IU machine blackout when i was waiting for ERP sensor to scan my IU. And just earlier i had no such problem at other carpark prior to enter this season parking.
I called the hotline but the staff not able to solve my issue, and suggest me to call them back next day, as other experienced staff will be around.
Please advise if any of our riders experienced similar problem.
Anyway the carpark is under Wilson Parking
Thank you very much for the response, the problem was IU not detected,
I Went to Vicom Inspection Centre at Kaki Bukit to check IU, found out that one of the Battery wire to IU machine was disconnected. The guy was very kind enough to help me fix, without the charges.
Although, the IU machine has heavy duty batt inside, it has to connect to bike batt. Even if there is no connection for few days, IU can still works, but after few days from the batt finish, then IU will stop working. That is what exactly happened to me.
The wire issue could be solved at bike repair place, but i was not sure what had happened , until i went to IU inspection centre.
Great learning though......
Anybody knows if the fi model's clutch and brake lever fits the same as the carb model? Or any other bike's lever that fit on the carb model? Im looking for aftermarket levers but scared buy already dont fit
Sent from my SM-N9005 using Tapatalk
Try webike japan bro!
Did anyone get the CBR150R 2015 Version? The one with the double headlamps
[ SOLD ]Selling Mine
Honda CBR 150R Excellent Condition
Color: Blue COE: 2024
OrgReg: 2005, BikeProd: 2004
** 3rd owner (onpaper 4), under my care since 2009.
** All wear and tear replaced, fresh road tax 6month till sept 2016
** New tyre/battery/PlugCabel/Plug/Chain-DID O-Ring/Spocket on 2015 Dec,(airfilter/new carb 2014)
** OWS 3In1, Oil change every 2month, regular polished and well taken care
** Engine never been open yet, still going strong and stable
** 80K+ mileage
** Very low maintenance bike with perfect fuel consumption around 40km/l.
** Price negotiable once view the bike and we can deal out, no obligation
** Full Cash xx K, Non-Urgent sale, View at Toapayoh or Yishun
** whatsapp xx
** Willing to trade with X1-R/Spark Coe 2018/2019 if good deals!
Last edited by virux; 25-03-2016 at 10:56 AM.
Anyone knows when the 2016 cbr150r will come to sg?
They launched in Indonesia already. Got new LED headlights and turn signals. Looks more aggressive than older models
May i check with you what is the reasonable used price for cbr 150r with 5-6yrs left coe?
Model 2012 (coe price that time was around 2k)
I am riding a 2013 model. Just wanna ask....is there any LTA approved aftermarket exhaust for my bike?
Or is there a way to go for inspection to get the exhaust certified after installation?
this bike cost how much if the coe left 4 to 6 years?
i removed a box and the kappa rack when i purchase mine cbr150r (newer version) from previous owner
looking to sell as its been lying around, interested pls contact me at 9 3 three 7 3 seven 9 one
Hi all, i have just recently passed my 2b and currently looking for a bike. Anyone here know of any bike shop that is selling a used honda cbr 150r with COE ending in dec 2017. I am looking to get from a bike shop as i would like to get a loan if possible. I am currently a NSF. Thanks in advance!
May anyone know where to buy the air filter for cbr150? How long we have to change the air filter ah? Thanks
About 6k$ - 7k$
i have lost my entire rear seat and need to get a replacement. It was lost during one long ride and god knows where it was being dropped, and besides the condition of the seat was quite bad. Any idea where i can get a affordable replacement?
Im riding a CBR150 R 2004 carb version. When I ride at higher speeds for awhile, the engine will begin to jerk forward a couple of times (also ill hear some pops coming out of what sounds like the muffler), then it won't accelerate. This forces me to stop, and when i do, if i let it idle it will die. When i wait about 3-4 minutes, i'm able to turn it on again and continue but then the same thing happens and i have to stop again. Has anyone had a similar problem? Does anyone know whats wrong with it?
Hi guys, just a quick question. I'm riding the cbr150 2002 model. What other mods can be made to the bike??
Assalamualaikum/Hello to fellow bikers...
Price : $19.90 Only with installation !!!LOWEST PRICE IN CAROUSELL !!!
100% Genuine Made In USA.
Over 400 pairs were sold !!!
Buy 2 pairs and above at $18/= per pair only !!! Purchase 4 pairs and above and enjoy free delivery + installation..
Contact me at 83885695 (Wan)
Pls check my listing at Carousell :
* 100 pairs sold in a month !! Customers who bought it, recommended to their friends coz this product WERKZ !!!
A MUST HAVE for your daily ride !!
- Grab On Grip covers reduce vibration and give you a softer feel, reducing hand and wrist fatigue, so you won't have that tingly feeling in your hands after a long ride.
- There are riders riding sportbikes with low handle bars, complain of sore palms from leaning on the grips for so long. With Grab On Grip covers, these problems will be a thing of the past !!!
- Grab On Grip covers allow you to ride in more comfort, especially on those long rides. PERFECT for the daily commuter, tour rider, and sport riders alike.
- Slip over existing grips for greater comfort, or to renew worn grips.
- Work with heated or standard grips.
- Save $$$, no need change the whole heater grip system which is very costly.
- Shock absorbing EPDM foam for a smoother ride.
- Provide comfort to wrist and palm. (Great for touring !!)
- Glove friendly.
- Extra durable, ozone, UV, gas and oil resistant
- Grip Covers MC402/width 1.25-1.45"/5"Length.
** Fits class 2, 2A, 2B bikes as long as its a standard grip, it can fit .
** There's customers that bought and fit it on their bicycles too !!!
Great for city riding where there's lots of traffic light, your hand will be tired during the on going "stop go" situation, this product will help to ease the stress on palm n wrist. Highly recommended for despatch/delivery riders.
"Once you try it, you'll LOVE it"
NOTE : Lot of customers been asking what's the difference between Grab On Grip with another brand that's selling @ $30-$35.
- 1st of all, Grab on Grip is Made in USA while the other grip is Made in UK. So the difference in currencies. USD vs Pound Sterling
- Difference in QUALITY. No doubt both are EPDM Foam but customers that have used Grab On Grip and have tried the "other brand", eventually came back to use Grab On Grip. Customers claimed that the "other brand" became smelly after using it for awhile and it tends to slip to the balancer causing the throttle to "stuck" which is VERY DANGEROUS. They have never face this problem when using Grab On Grip. Well, expensive things doesn't mean its good.
- Some customers asked how come mine is "cheaper" than the rest ?
Ans : There's no need for me to claim i'm the "dealer/distributor" when the product i sell is 100% Genuine Made in USA.. As a biker, I wanted to share my great experience of using this product for more than 5 years at an affordable price.
Tags : BMW - All models. Ducati - All Models. KTM - All Models. Harleys (Only if its standard grips. Those oversize grips, can't fit). Triumph - All models. Moto Guzzi, Reiju, Kawasaki - All models. Honda - All models. Yamaha - All models. Phantom, RXZ, Piaggio Vespa Gilera, Motard, Scramblers, Kups.
Last edited by WanFazer; 24-10-2016 at 01:33 AM.
"Shut Up n Ride"
Hi all, any idea what's the price for a used CBR 150R 2010 now?
Last edited by litlit; 06-11-2016 at 09:32 PM.
Last edited by Julietkilolima; 21-08-2017 at 10:11 PM.
Any old models of cbr150 r? Anyone selling do let me know. Thanks
my cbr150r 2009 fairing attachment point broke and the fairing broke off.. anyone know where I can get a replacement fairing kit for the old model?
Time to scrap.
---deleted-- wrong thread
Scrap time ...... anyone looking for givi monoshock rack , base plate and e33 box letting go soon
Wondering if anyone still alive in this cbr150r thread still. I currently just enrol to take my 2b licence and found my eyes on this bike . Read though the forums seen some youtube videos and found a place that sell it still .
Any advice on this bike ?
Sent from my SM-G935F using Tapatalk
Its a good transport bike.
Fuel economy at 35-40km/l depending on how hard you ride.
Its a tough workhorse, can endure lots of abuse. I personnally dont abuse it.
Its a sporty looking bike compared to other 2b bike at the fuel economy range.
Maintanence wise, its easy and cheap. Parts are easily available too.
Easy to squeeze through traffic during lane splitting and able to speed through danger areas fairly quick as well.
Hi im newbie recently own bike any advise fy..scrap 2019 nov